Pineview Reservoir Water Level Today

Utah · near Ogden · Well below full pool

Nearby: Jordanelle Reservoir · Flaming Gorge Reservoir · Palisades Lake

Flood pool4,900.0Full pool4,898.3Bottom of pool4,818.0
Elevation
4,832.90 ft
From full pool
−65.35 ft
Percent of pool
18.6%
24-hour change
no change
7-day change
no change
Reading
Nov 15, 2026 · USACE

65.4 ft below full pool. Many ramps are likely closed or extended at this level; confirm with the operating agency.

Last year at Pineview Reservoir

4,829.04,864.54,900.0full poolflood poolSep 25Dec 25Mar 26Jun 26Sep 26
Daily mean elevation in feet, last 400 days. Dashed lines mark the published pool elevations.

Pineview Reservoir is 65.35 ft below full pool, at 4,832.90 ft, holding steady over the last 24 hours. That puts the lake at 18.6 percent of its conservation pool. The top of the flood pool is 67.1 ft higher, at 4,900.00 ft.

Over the last 7 days the level held steady, and over 30 days it fell 1.60 ft. In the 400 days of readings on this page the high was 4,895.50 ft on Apr 20, 2026 and the low was 4,829.00 ft on Sep 28, 2026, a range of 66.50 ft.

The reading is the U.S. Army Corps of Engineers gauge at Pineview Dam & Reservoir, near Ogden, taken Nov 15, 2026 and referenced to the NGVD29 datum. This page is rebuilt once a day from the agency feed; it is not a live gauge, so during a fast rise or a scheduled release check the USACE page for hourly values.

Full pool and the late-summer drawdown

Pineview Reservoir is full at about 4,898 ft, and the crest of Pineview Dam is 4,908 ft. It stores Ogden River snowmelt for irrigation between the Wasatch Range and the Great Salt Lake, so it fills in spring and is drawn down hard through summer and fall.

In the last year of readings it reached 4,895.5 ft on April 20, 2026, close to full, and was drawn down about 66 ft to 4,829 ft on September 28, 2026. On November 16, 2026 it read 4,832.9 ft. At low levels the bays near Huntsville turn to mudflat and the beaches are far from the water.

About Pineview Reservoir

Pineview Reservoir sits at the east end of Ogden Canyon, 7 miles east of Ogden, where the north, south and middle forks of the Ogden River meet; part of Huntsville lies between its central and southern bays. The dam was built for the Bureau of Reclamation's Ogden River Project, authorized in 1935, with construction from September 1934 to June 1937.

The dam was first 103 ft high, holding 44,175 acre-feet. The later Weber Basin Project raised it to 137 ft and capacity to 110,150 acre-feet. Radial gates on the spillway pass up to 10,000 cubic feet per second, and the reservoir now serves about 25,000 acres of irrigated land as well as heavy summer boating.

Notes last reviewed Nov 17, 2026. Sources: Wikipedia, Pineview Dam.

Pineview Reservoir pool elevations

Current elevation4,832.90 ft
Full pool (top of conservation)4,898.25 ft
Top of flood pool4,900.00 ft
Bottom of conservation pool4,818.00 ft
Top of dam4,908.00 ft
Inflow76 cfs
Outflow76 cfs
30-day change−1.60 ft
1-year high4,895.50 ft (Apr 20, 2026)
1-year low4,829.00 ft (Sep 28, 2026)
Vertical datumNGVD29
Operating agencyU.S. Army Corps of Engineers, SPK district

Source: U.S. Army Corps of Engineers. Read what full pool and flood pool mean.

Pineview Reservoir level questions

What is the water level of Pineview Reservoir today?

Pineview Reservoir is at 4,832.90 ft as of Nov 15, 2026, −65.35 ft relative to full pool (4,898.25 ft). The 24-hour change is no change.

What is full pool at Pineview Reservoir?

Full pool, the top of the conservation pool, is 4,898.25 ft (NGVD29). Above that, water is stored temporarily in the flood pool up to 4,900.00 ft. The bottom of the conservation pool is 4,818.00 ft.

Is Pineview Reservoir rising or falling?

Over the last 24 hours the level is no change; over 7 days it held steady, and over 30 days it fell 1.60 ft.

Where does this Pineview Reservoir level come from?

From the U.S. Army Corps of Engineers (USACE) public data feed for Pineview Dam & Reservoir. Lake Levels Today republishes the agency's daily value without adjustment and links to the source below.